The Ultralite-mk3 Hybrid allows you to connect a wide variety of studio gear, including microphones, guitars, synths, keyboards, drum machines, effects processors and more.
Front panel I/O
The Ultralite-mk3 Hybrid's front-panel volume knob controls the headphone or main outputs with the press of a button. Additionally, the knob can be programmed to control any combination of outputs (analog and/or digital). For example, it can control monitor output for an entire 5.1 or 7.1 surround mix.
Digitally controlled analog input trim
All of the UltraLite-mk3 Hybrid's analog inputs are equipped with digitally controlled analog trim controls that allow adjustments in precise 1 dB increments. The mic/guitar input trims can be adjusted using front-panel digital rotary encoders that provide feedback in the front panel LCD. All analog inputs, including eight TRS analog inputs, can be trimmed using the CueMix FX control software for Mac and Windows.
This allows you to fine-tune your trim settings for synths, effects modules and a wide variety of analog inputs for optimum levels. Different trim configurations can then be saved as files on disk for instant recall.
Rear panel I/O
Six balanced (TRS) 24-bit analog inputs and ten outputs can operate at sample rates up to 192 kHz (a total of eight analog inputs and ten analog outputs). RCA S/PDIF connectors also supply independent stereo digital I/O.
|Analog 24-bit 192 kHz on +4/-10 bal/unbal TRS||6||8|
|Mic/instrument preamps 24-bit 192 kHz on XLR/TRS combo||2||-|
|Main outputs 24-bit 192 kHz on bal TRS||-||stereo|
|S/PDIF 24-bit 96 kHz (digital)||stereo||stereo|
Control room monitoring
Powered monitors can be plugged directly into the outputs of the UltraLite-mk3 Hybrid and you can attenuate the output from the software or the front-panel VOL control. Main out volume is not limited to stereo operation: quad, 5.1, 7.1 and even user-defined configurations are available. You can even program the UltraLite-mk3 Hybrid to control all 14 outputs with the VOL knob.