Video I/O
Choose any input as a video source and the signal is distributed to all outputs, both HD and SD simultaneously, via hardware-accelerated up/down conversion. This allows you to work with both HD and SD devices without cable swapping. The HD-SDI and SD-SDI banks supply two mirrored outputs so that you can connect both a deck and a monitor to each bank. Independent banks of HD and SD component are also supplied, along with legacy SD formats (S-Video and Composite).
- 1 x HD-SDI in and out (4:2:2 10-bit) on independent BNC connectors
- 1 x SD-SDI in and out (4:2:2 10-bit) on independent BNC connectors
- 1 x extra HD-SDI output connector
- 1 x extra SD-SDI output connector
- 1 x HDMI® output (4:2:2 10-bit, YCbCr or RGB)
- Support for DVI output with HDMI-to-DVI adapter (sold separately)
- 1 x HD component in and out (10-bit, YPbPr or RGB) on independent BNCs
- 1 x SD component in and out (10-bit, YPbPr or RGB) on independent BNCs
- 1 x composite in and out (10-bit)
- 1 x S-video in and out (10-bit)